Native Mode, Keyboard Definition Mode | IBM 1483DSV instruction

Setup Menus, Controls, and Indicators

Native Mode

Native mode causes the display station to provide to the attached controller unconverted keyboard scan codes which are defined by the controller depending on how it is configured. Native mode is available on the 102/103-key, 104-key, and 122-key keyboards. In Native mode, all 122-key keyboard functions are available. Native mode also allows the use of Keyboard Definition mode on the 122-key keyboard. To use Native mode, you must be connected to one of the following controllers:

•MTX/MTC 1174 Network Controller

•Memorex Telex 1274 Control Unit at firmware release level 11.0 or higher

•IBM 3174 Control Unit

•IBM 3274 Control Unit at configuration support D microcode release level 63.0 or higher.

To use Native mode with a 102/103-key keyboard, you must be connected to one of the following controllers:

•MTX/MTC 1174 Network Controller

•Memorex Telex 1274 Control Unit at firmware release 16.0 or higher (if the 1274 supports Multiple Logic Sessions, firmware release 53.0 or higher)

•Memorex Telex 1374 Control Unit

•IBM 3174 Control Unit

•IBM 3274 Control Unit at configuration support D microcode release level 65.0 with RPQ # 760825.

The control unit to which the 1483 is attached also must be configured to support Native mode.

Keyboard Definition Mode

In Native mode, the 1483 supports Keyboard Definition mode. Keyboard Definition mode enables you to modify the keyboard layout by using the control unit’s Keyboard Definition Utility. The attached control unit must be configured properly to support this feature.

3-2	701344-003

Image 21

IBM 1483DSV manual Native Mode, Keyboard Definition Mode

Contents

1483/1483DSV Display Station Operator’s Manual 701344-003 ISSUE/REVISION Schedule This equipment complies with FCC regulations for EMI 701344-003 Iii Table of Contents Table of Contents Table of Contents Page List of Illustrations Introduction Standard Features Introduction Introduction Introduction Introduction Customer Installation Physical StatisticsEnvironmental Requirements Inspecting the Packages Customer Installation Receptacle Connectors Setting Up the Display Station Connecting the Display Station to the Host Systems Installing the Optional Light Pen Setting Up the Display Screen Color MonitorMonochrome Monitor Offline Test Menu Conducting the Preliminary Operating Test Emulation Mode Setup Menus, Controls, and IndicatorsDisplay Controls Keyboard Operation Modes Keyboard Definition Mode Native Mode Keyboard Key Functions Keyboard Controls Offline Setup Mode Offline Test Menu Selections Offline Test Menu Offline Screen Menu User Menus MONOCASE/DualCase Mark UnprotectedMark Unprotected Field Character MUP Row/Column MUP OverstrikesScreen Size Partition Leaving the Offline Screen Menu Intensity Control Cursor Size Offline Cursor MenuCursor Blink Rule Style Stationary Rule Rule ColorLeaving the Offline Cursor Menu Alarm Volume Click EnableOffline Keyboard Menu Repeat Delay Click VolumeCursor Speed Keyboard Type Numeric Lock Changing the Keyless Password Offline Printer Menu Leaving the Offline Keyboard Menu Coax Program Setup Strings for Prints Printer Format Control Host Addressable Print Suppress automatic line feed when Adjusting Line Feed FF takes position if followed by data FF ignored when not in first print positionFF at end of print Transparent Leaving the Offline Printer Menu Printer TRPQs Setup Language Dim TimerOffline Miscellaneous Menu Coax Indicator Power DownDim Style Light Pen Clicker Offline Color Menu Leaving the Offline Miscellaneous Menu Color Changing the Color Settings Returning to the Default Color Settings Background ColorLeaving the Offline Color Menu Online Setup Mode Leaving the Online Screen Menu Online Screen Menu Leaving the Online Cursor Menu Online Cursor Menu Leaving the Online Keyboard Menu Online Keyboard Menu 14. Online Printer Menu Online Printer Menu Characters Per Inch Print Quality Wide Paper Default to 17 CPILines Per Inch Lines Per Suppress Null Lines Auto Skip ModeAuto Skip Trimmed Print Corners Print Position Ascii Passthru Mode OFF Nibble Delimiters Leaving the Online Printer Menu Orientation Online Miscellaneous Menu Go OfflineLeaving the Online Miscellaneous Menu Leaving the Online Color Menu Online Color Menu System Symbols Operator Status Row Indicators Do Not Enter Input Inhibited Symbols Readiness and System Connection Symbols Nnn Shift and Mode Symbols Reminder Symbols Entry Assist Indicators Printer Status Symbols Response Time Monitor Indicators Local SymbolsLocal Error Indicators Device Dependent Symbols Record/Play Symbols Preparing to Operate Operating Procedures Adjusting the Screen Display Data Entry Function Assigning a Coax Printer Typical Formatted Screen Keyboard Operations Moving the Cursor Shift Mode Numeric Lock ModeEntering Data Characters and Selecting Modes Storing Keystroke Sequences Keystroke Record/Playback Enabling Record Security Mode Record/Play Security ModeDisabling Record Security Mode Playing Keystroke Sequences Data Editing Function Cursor Select Data Entry Message Transmitting Function Print Function Setting Print Type Printer/Session Screen Menu Screen Paper Control Session Control PrintingExiting from the Online Print Menu Partitioning Extended Select FunctionExtended Select Keyboard Overlays Keyboard Switch Settings Entry AssistResponse Time Monitor Keyboard Switch Settings = OFF and O = on Setting the Keyboard Switches through Key Sequences Using the Light Pen to Select Data Display IndicatorsPower-On Cursor Using the Electronic Security Lock Key and 122-Key* Keyboards Entry Assist Entering Document Mode Entry Assist FunctionsFormat Controls Format Scale Left and Right Margins Tab Stops Alternate Right Margin Type End-of-Line Signal Format Scale OriginCursor Movement and Editing Functions Word Wrap Move Cursor to Next Word Autorepeat Move Cursor to Previous Word AutorepeatDelete Next Word Backtab Function Cursor TabbingBackspacing with Deletion New Line Function Calculator Mode Calculator OperationMoving the Calculator on the Screen Jumping Between Calculator Mode and Normal Operation Setting the Decimal PlaceDecimal Calculator Simulated Decimal Calculator Calculating Percentages Other Calculator Functions Binary Mathematical Operations Binary Calculator Simulated Hex Calculator Hex Calculator Hex Mathematical Operations Problem Determination and Maintenance Diagnostic Testing FunctionOffline Tests Basic Assurance Tests System Manager Menu KDB Test KBD Test Adjusting the Contrast Mod Size TestScreen Centering Screen Centering Screen Selecting Password Protection Enter Serial # Enter Password Init Nvram Counters KBD SwitchesProgram Play/Record Option Default Settings for Setup Options Reset Nvram Problem Determination and Maintenance Keyboard Language User Defined Data User Defined Data Screen Fields Product ID Symptom Recommended Action Symptom/Action Chart Problem Determination and Maintenance =a number, zero through nine Preventive Maintenance Installation Requirements Operating the Split Screen FeatureControllers Display Requirements Entering Split Screen Mode OperationActive and Suspended Screens Split Screen Mode Enhancements Key AssignmentsZoom Select Bottom Select Top Swap Session Step Active Session Paste MarkPaste Horizontal Paste Vertical Mark Field Mark/Paste Block Copy Walk Through Screen Print Mode Operating the Dual Screen Feature Two Sessions in Side-by-Side Format Entering Dual Screen Mode Key Dual Screen Keyboard Keys Dual Screen Mode Enhancements Select Left Select RightReverse Keys Session Active session Inactive session Mark Mark Field Walk Through Appendix A. Printer Information Switch SettingsSupported Character Sets Hewlett-Packard ThinkJet Hewlett-Packard DeskJet Printer Information Epson FX1050 DIP Switch Setting Description Epson LQ1050 Datastream Modes Index-1 Index Index-2 701344-003 Index Hexadecimal calculator Exporting values Index-3 Index-4 701344-003 Modes Numeric Lock Index-5 Printer Index-6 701344-003 Index-7