Setup Menus, Controls, and Indicators
| Programmable Setup Strings for Prints |
| |
1st Position | 00 | 17th Position | 00 |
2nd Position | 00 | 18th Position | 00 |
3rd Position | 00 | 19th Position | 00 |
4th Position | 00 | 20th Position | 00 |
5th Position | 00 | 21st Position | 00 |
6th Position | 00 | 22nd Position | 00 |
7th Position | 00 | 23rd Position | 00 |
8th Position | 00 | 24th Position | 00 |
9th Position | 00 | 25th Position | 00 |
10th Position | 00 | 26th Position | 00 |
11th Position | 00 | 27th Position | 00 |
12th Position | 00 | 28th Position | 00 |
13th Position | 00 | 29th Position | 00 |
14th Position | 00 | 30th Position | 00 |
15th Position | 00 | 31st Position | 00 |
16th Position | 00 | 32nd Position | 00 |
Use UP/DOWN Cursor Keys to select position to change
Use LEFT/RIGHT Cursor Keys to alter data at selected position
Use ENTER Key to make changes and return to previous menu
Use RESET Key to return to previous menu
Use CLEAR Key to set all positions to 00
Figure 3-8. Programmable Setup Strings for Prints Screen
Host Addressable Print
The host addressable print feature enables the host to send print requests to the 1483’s attached printer. LU2 (screen) prints are always formatted by the display according to the printer menu selections.
To enable or disable host addressable print, highlight Host Addressable Print and press the Enter key to toggle between Yes (the default) and No. Host addressable print cannot be enabled if an Emulate
Controllers that support host addressable print are the MTX/MTC 1174 Network Controller, Release 7.0 and higher, and the Memorex Telex 1374 Control Unit, Release 6.0 and higher.
Note: The host addressable print feature supports LU1 SCS commands.
If host addressable print is enabled, the Adjusting Line Feed and Adjusting Form Feed options are displayed.
Printer Format Control
The printer format control feature enables the user to specify whether the formatting of LU1 or LU3 will be handled by the display.
|
