Setup Menus, Controls, and Indicators
Intensity Control
The Intensity Control setting enables you to determine the area to be highlighted. There are three settings for Intensity Control: Normal (the default), Data only, and Highlight. It is available only on monochrome monitors.
To use the Intensity Control option, you must first set the Reverse Video option On (black characters on an amber, green, or white screen). Highlight Intensity Control and press the Enter key to cycle through the choices: Normal (the default), Data Only, and Highlight.
Normal – The entire background field, data area and nulls, is highlighted.
This is Normal Intensity.
Data only – The background field, data only, is highlighted.
This is Data Only Intensity.
Highlight – The foreground color is highlighted (only the data characters, not the nulls).
This is Highlight Intensity.
Figure 3-4. Intensity Control Options
Leaving the Offline Screen Menu
To leave the Offline Screen menu, use the Left and Right Arrow keys to highlight another offline setup menu, or press the Reset key to leave Offline Setup mode and display the Offline Test menu.
