Chapter 2. Customer Installation

This chapter lists the physical statistics and environmental requirements for the 1483. It also describes the procedures for setting up the display station and performing a preliminary operating test.

The 1483 is designed to be installed by the user. No special tools are required.

Physical Statistics

Measurement

Logic Element

Weight

3.45 lb (1.56 kg)

 

 

Height

2.30 in (5.84 cm)

 

 

Depth

12.00 in (30.48 cm)

 

 

Width

11.80 in (29.97 cm)

 

 

Power Consumption

6 Watts typical

 

 

Heat Dissipation

20 BTU typical

 

 

Refer to the owner’s manual that comes with your monitor for the monitor’s specifications.

Environmental Requirements

Clearance

Six inches on all sides of the Unit (Damage may result

if air vents are blocked.)

 

 

 

Operating Temperature

50° to 105° F (10° to 40.6° C)

Range

 

 

 

Relative Humidity

8% to 80%, no condensation

 

 

Maximum Wet Bulb

80° F (26.7° C)

 

 

Power

90 to 132 VAC or 180 to 264 VAC at 47 to 64 Hz

For units operating at 100–120V: The power cable required for domestic units is a UL listed, CSA certified 18/3 AWG, type SVT or SJT cable (15-foot [4.6-meter] maximum). It is terminated on one end by a 125V, 15A grounding type attachment connector. It is terminated at the other end by a 125V, 15A parallel blade, grounding type attachment plug.

701344-003

2-1

Page 14
Image 14
IBM 1483DSV manual Customer Installation, Physical Statistics, Environmental Requirements