Conducting the Preliminary Operating Test | IBM 1483DSV guide

Customer Installation

Conducting the Preliminary Operating Test

1)Ensure that the system control unit is powered on and operational.

2)Turn the Power On/Off switch to Off (O) .

3)Set the Power-On/Off switch to On ( ) while simultaneously holding down the space bar. After a few seconds, an alarm sounds.

4)Continue to hold the space bar down until a screen like the one in Figure 2-2, below, is displayed. You may need to adjust the Brightness or Contrast control.

Offline Test Menu

Select One of the Following

User Menus

System Manager Menus

User Defined Data

Product ID 1483V (c)1995

Go Online

Figure 2-2. Offline Test Menu

5)If the display station is designated to operate with settings other than the default modes, see “Offline Test Menu” on Page 3- 5 for a description of the Offline Setup menus to change the modes. Obtain the settings designated for the display station from the system operator. The controller to which the display station attaches must be configured to support the settings selected. When the display station is set correctly, it is ready to go online. Press the Reset key to display the cursor in the upper left corner of the screen and the operator status row at the bottom.

6)If the screen does not have the cursor in the upper left corner and the operator status row at the bottom, see Chapter 7, “Problem Determination and Maintenance.”

7)Installation of the display station is now complete. Certain settings may be changed while online. See Figure 3-11, “Online Screen Menu” for further information.

2-6	701344-003

Image 19

IBM 1483DSV manual Conducting the Preliminary Operating Test, Offline Test Menu

Contents

1483/1483DSV Display Station Operator’s Manual 701344-003 ISSUE/REVISION Schedule This equipment complies with FCC regulations for EMI 701344-003 Iii Table of Contents Table of Contents Table of Contents Page List of Illustrations Introduction Standard Features Introduction Introduction Introduction Introduction Physical Statistics Customer InstallationEnvironmental Requirements Inspecting the Packages Customer Installation Receptacle Connectors Setting Up the Display Station Connecting the Display Station to the Host Systems Installing the Optional Light Pen Color Monitor Setting Up the Display ScreenMonochrome Monitor Offline Test Menu Conducting the Preliminary Operating Test Keyboard Operation Modes Setup Menus, Controls, and IndicatorsEmulation Mode Display Controls Keyboard Definition Mode Native Mode Keyboard Key Functions Keyboard Controls Offline Setup Mode Offline Test Menu Selections Offline Test Menu Offline Screen Menu User Menus Mark Unprotected MONOCASE/DualCaseMark Unprotected Field Character MUP Partition MUP OverstrikesRow/Column Screen Size Leaving the Offline Screen Menu Intensity Control Rule Style Offline Cursor MenuCursor Size Cursor Blink Rule Color Stationary RuleLeaving the Offline Cursor Menu Click Enable Alarm VolumeOffline Keyboard Menu Keyboard Type Click VolumeRepeat Delay Cursor Speed Numeric Lock Changing the Keyless Password Offline Printer Menu Leaving the Offline Keyboard Menu Coax Program Setup Strings for Prints Printer Format Control Host Addressable Print Suppress automatic line feed when Adjusting Line Feed Transparent FF ignored when not in first print positionFF takes position if followed by data FF at end of print Leaving the Offline Printer Menu Printer TRPQs Dim Timer Setup LanguageOffline Miscellaneous Menu Light Pen Clicker Power DownCoax Indicator Dim Style Offline Color Menu Leaving the Offline Miscellaneous Menu Color Changing the Color Settings Background Color Returning to the Default Color SettingsLeaving the Offline Color Menu Online Setup Mode Leaving the Online Screen Menu Online Screen Menu Leaving the Online Cursor Menu Online Cursor Menu Leaving the Online Keyboard Menu Online Keyboard Menu 14. Online Printer Menu Online Printer Menu Characters Per Inch Print Quality Lines Per Default to 17 CPIWide Paper Lines Per Inch Trimmed Print Corners Auto Skip ModeSuppress Null Lines Auto Skip Print Position Ascii Passthru Mode OFF Nibble Delimiters Leaving the Online Printer Menu Orientation Go Offline Online Miscellaneous MenuLeaving the Online Miscellaneous Menu Leaving the Online Color Menu Online Color Menu System Symbols Operator Status Row Indicators Do Not Enter Input Inhibited Symbols Readiness and System Connection Symbols Nnn Shift and Mode Symbols Reminder Symbols Entry Assist Indicators Printer Status Symbols Local Symbols Response Time Monitor IndicatorsLocal Error Indicators Device Dependent Symbols Record/Play Symbols Preparing to Operate Operating Procedures Adjusting the Screen Display Data Entry Function Assigning a Coax Printer Typical Formatted Screen Keyboard Operations Moving the Cursor Numeric Lock Mode Shift ModeEntering Data Characters and Selecting Modes Storing Keystroke Sequences Keystroke Record/Playback Playing Keystroke Sequences Record/Play Security ModeEnabling Record Security Mode Disabling Record Security Mode Data Editing Function Cursor Select Data Entry Message Transmitting Function Print Function Setting Print Type Printer/Session Screen Menu Screen Paper Control Printing Session ControlExiting from the Online Print Menu Extended Select Function PartitioningExtended Select Keyboard Overlays Entry Assist Keyboard Switch SettingsResponse Time Monitor Keyboard Switch Settings = OFF and O = on Setting the Keyboard Switches through Key Sequences Cursor Display IndicatorsUsing the Light Pen to Select Data Power-On Using the Electronic Security Lock Key and 122-Key* Keyboards Entry Assist Entry Assist Functions Entering Document ModeFormat Controls Format Scale Left and Right Margins Tab Stops Alternate Right Margin Type Format Scale Origin End-of-Line SignalCursor Movement and Editing Functions Word Wrap Move Cursor to Previous Word Autorepeat Move Cursor to Next Word AutorepeatDelete Next Word New Line Function Cursor TabbingBacktab Function Backspacing with Deletion Calculator Operation Calculator ModeMoving the Calculator on the Screen Setting the Decimal Place Jumping Between Calculator Mode and Normal OperationDecimal Calculator Simulated Decimal Calculator Calculating Percentages Other Calculator Functions Binary Mathematical Operations Binary Calculator Simulated Hex Calculator Hex Calculator Hex Mathematical Operations Diagnostic Testing Function Problem Determination and MaintenanceOffline Tests Basic Assurance Tests System Manager Menu KDB Test KBD Test Mod Size Test Adjusting the ContrastScreen Centering Screen Centering Screen Selecting Password Protection Enter Serial # Enter Password Play/Record Option KBD SwitchesInit Nvram Counters Program Default Settings for Setup Options Reset Nvram Problem Determination and Maintenance Keyboard Language User Defined Data User Defined Data Screen Fields Product ID Symptom Recommended Action Symptom/Action Chart Problem Determination and Maintenance =a number, zero through nine Preventive Maintenance Display Requirements Operating the Split Screen FeatureInstallation Requirements Controllers Operation Entering Split Screen ModeActive and Suspended Screens Key Assignments Split Screen Mode EnhancementsZoom Select Bottom Select Top Swap Session Step Active Session Paste Vertical MarkPaste Paste Horizontal Mark Field Mark/Paste Block Copy Walk Through Screen Print Mode Operating the Dual Screen Feature Two Sessions in Side-by-Side Format Entering Dual Screen Mode Key Dual Screen Keyboard Keys Dual Screen Mode Enhancements Select Right Select LeftReverse Keys Session Active session Inactive session Mark Mark Field Walk Through Hewlett-Packard ThinkJet Switch SettingsAppendix A. Printer Information Supported Character Sets Hewlett-Packard DeskJet Printer Information Epson FX1050 DIP Switch Setting Description Epson LQ1050 Datastream Modes Index-1 Index Index-2 701344-003 Index Hexadecimal calculator Exporting values Index-3 Index-4 701344-003 Modes Numeric Lock Index-5 Printer Index-6 701344-003 Index-7