Setup Menus, Controls, and Indicators

Color

To change the display color selections, highlight Color and press the Enter key to cycle through the selections. When a selection is displayed, it is active.

Note: If you select the same color for the foreground and background, the foreground color defaults to black.

If you select the same color for the background and highlighted fields, the highlighted fields default to black and the characters in the highlighted fields default to the background color.

Color selections are:

2 Color Unprotected Normal and Protected Normal fields are C4 (green), Unprotected Highlighted and Protected Highlighted fields are C7 (white), and Background Color is C0 (black). You can change the factory set default colors assigned to C4 and C7 by changing the colors assigned to the fields, as described in “Changing the Color Settings,” below, but you cannot change the color numbers ( C4 and C7) assigned to the fields.

4 Color Unprotected Normal is C4 (green), Protected Normal is C1 (blue), Unprotected Highlighted is C2 (red), Protected Highlighted is C7 (white), and Background Color is C0 (black). You can change the factory set default colors assigned to C1, C2, C4, and C7 by changing the colors assigned to the fields, as described in “Changing the Color Settings,” below, but you cannot change the color numbers (C1, C2, C4, and C7) assigned to the fields.

4 Color Programmable Unprotected Normal is C4 (green), Protected Normal is C1 (blue), Unprotected Highlighted is C2 (red), Protected Highlighted is C7 (white), and Background Color is C0 (black). You can change the factory-set default colors assigned to C1, C2, C4, and C7 by changing the colors assigned to the fields, as described in “Changing the Color Settings,” below. You can also change the default color numbers (C1, C2, C4, and C7) to any of the seven available colors (C1 through C7).

To change the color number assigned to a field, use the Up and Down Arrow keys to highlight the field you want to change (Unprotected Normal, Protected Normal, Unprotected Highlighted, Protected Highlighted, or Background Color), then press the Enter key to scroll through the color numbers (C1 through C7).

Changing the Color Settings

1)Use the Up and Down Arrow keys to highlight one of the following color choices:

C1 Blue

C2 Red

C3 Pink

C4 Green

C5 Turquoise

C6 Yellow

C7 White

701344-003

3-25

Page 44
Image 44
IBM 1483DSV manual Changing the Color Settings