![](/images/new-backgrounds/1106375/106375159x1.webp)
Operating Procedures
Doc |
| Wrap |
| Chg |
On/Off |
|
| Fmt | |
|
|
| ||
|
|
|
|
|
Figure 4-6. Extended Select Overlay
(102-Key Keyboards)
Entry Assist
Rtm
The Entry Assist function facilitates the creation and editing of text such as memos, letters, and documents. For more information on the Entry Assist function, see Chapter 5, “Entry Assist.”
In order to use the Entry Assist function, the control unit to which the display station attaches must provide Entry Assist support. Consult the control unit operator’s manual for additional Entry Assist specifications and operating procedures.
Response Time Monitor
The Response Time Monitor (RTM) records the speed of communication between the devices attached to a valid, properly configured control unit (Memorex Telex 1274 or IBM 3274) and the host CPU with which they are attached. The RTM is accessed and exited by pressing the ExSel key, followed by the F19 key
Keyboard Switch Settings
The keyboard switches are set at the factory according to the keyboard ordered. You should not need to change them. If the settings are inadvertently changed, set them according to the table on Page
Some keyboards do not have access to the keyboard switches. If you have this kind of keyboard, you can set the switches through key sequences. See “Setting the Keyboard Switches through Key Sequences” on Page