IBM 1483DSV manual Print Quality, Characters Per Inch

Setup Menus, Controls, and Indicators

		4019
		1301
		1201
		4202
		1173
		HP DeskJet
	1302	HP ThinkJet
	1202	FX1050
	4202	4207	1808
	LQ1050	5202
Option	4206	5204	HP LaserJet	Plain
Quality	X	X	X
Chars/Inch	X	X	X
Wide Paper	X
Lines per Inch	X	X	X
Lines/Page	X	X	X	X
Default to 17 CPI	X	X	X
Print with attributes	X	X	X
Suppress Null Lines	X	X	X	X
Auto Skip Mode	X	X	X	X
Auto Skip	X	X	X	X
Trimmed Print Corners	X	X	X	X
Trim Borders	X	X	X	X
Print Position	X	X	X	X
Nibble Delimiter(s)	X	X	X	X
Page Orientation			X

Print Quality

If the local screen printer supports it, you can select a print quality setting of NLQ (Near Letter Quality) or Draft (Draft Quality). To change the print quality, highlight Quality on the Online Printer menu and press Enter to toggle to the setting required. Draft is the default value. This option is not available if you selected Plain as the attached Printer Type on the Offline Printer menu (Figure 3-7 on Page 3-15).

Characters Per Inch

You can select from four different CPI (characters per inch) settings when using local screen print: 10 (default), 12, 17, or 10.5 (LaserJet and 1808 printers only) characters per inch. To change the CPI setting for the local screen printer, highlight Chars/Inch on the Online Printer menu and press Enter until the required setting is displayed.

This option is not available if you selected Plain as the attached Printer Type on the Offline Printer menu (Figure 3-7 on Page 3-15).

3-32 701344-003