SATO GL4XXE manual TGL Emulation Mode Table

		Unit 4: Printer Configuration
		DGL EMULATION MODE (TABLE 4-12)
MENU		DESCRIPTION
	Determines whether the print intensity commands processed by the printer will be those sent
	from a host or those set by the printer’s operator panel.
Heat Cmd (H)
	•	Process - factory default. Downloaded commands take precedence.
Process*
	•	Ignore - downloaded commands are ignored and printer settings take precedence.
	Allows the user to disable the speed commands (Print, Feed, Reverse).
	•	Process - factory default. Acknowledges speed commands.
Speed Cmd (P,S)
Process*	•	Ignore - does not acknowledge speed commands.
	Allows the user to disable the commands affecting the cutter assembly.
	•	Process - factory default. Acknowledges cutter commands.
Cut Cmd (o,:,c)
Process*	•	Ignore - does not acknowledge cutter commands.
	Allows the selection of how the printer will respond to the software switch settings of <ESC>V
	commands. this command enables Cut or Tear-Off mode, or disables both by selecting
	Continuous mode.
Soft. Switch (V)
Process*	•	Process - factory default. Responds to the commands.
	•	Ignore - does not respond to the commands.
	Allows the selection of how the printer will respond to various sensor commands.
	•	Process - factory default. Acknowledges sensor commands.
Sensor Cmd (e,r)
Process*	•	Ignore - does not acknowledge sensor commands.
	Allows the user to disable the commands that select the Format Attribute.
	•	Process - factory default. Acknowledges commands that select formatting attributes.
Format Attr. (A)
Process*	•	Ignore - does not acknowledge commands that select formatting attributes.
		TGL EMULATION MODE (TABLE 4-13)
MENU		DESCRIPTION
	Permits entry into the EMULATION Mode.
EMULATION
	Allows the specific emulation to be selected or if the Select option is chosen, the menu to follow
	will contain a list of emulation options available.
EMULATION
Select
	Allows the selection of the specific emulation to be selected from a list.
	The allowable emulation options are: PGL for Printronics, ZGL for Zebra, TGL for TEC, IGL for
Select
TGL*	Intermec, SGPL for SATO, and DGL for Datamax.

GL408-412e Operator’s Manual 4-75