LOADING AN ORIGINAL

An original can be loaded in the RSPF or placed on the document glass. Load multi-page sheet originals in the RSPF. Place books and other originals that cannot be loaded in the RSPF on the document glass.

USING THE RSPF

1 Lift the RSPF and make sure an original is not placed on the document glass. Gently close the RSPF.

If originals are placed both in the RSPF and Note on the document glass, only the original in

the RSPF will be scanned.

3 Align the edges of the original pages and then insert the pages face up in the document feeder tray.

Insert the stack into the document feeder tray until it stops. The stack should not be higher than the indicator line (maximum 100 pages).

2 Adjust the original guides on the RSPF to the width of the original.

USING THE DOCUMENT GLASS

1 Open the RSPF, place the original face down on the document glass, and close the RSPF.

Regardless of the size of the original, place the original in the far left corner of the document glass. (Align the upper left-hand corner of the original with the tip of the mark.)

Document glass scale

Document glass scale

5-1/2" x 8-1/2"

8-1/2" x 11"R

 

8-1/2" x 14"

8-1/2" x 11"

11" x 17"

10