Sharp AR-M237 TRANSMITTING A TWO-SIDEDDOCUMENT, Touch the [OK] key, 3 Touch the [ORIGINAL] key, 2 Place the original. (p.10), 1 Make sure that the machine is in fax mode

STANDARD

RESOLUTION

AUTO 8½x11R

ORIGINAL

BASIC OPERATIONS

TRANSMITTING A TWO-SIDED DOCUMENT

The RSPF can be used to automatically fax both sides of two-sided document by memory transmission.

1 Make sure that the machine is in fax mode.

5 Select the [ROTATE THE IMAGE 90 DEGREES] checkbox.

SCAN		When the [FAX] key light
	DATA is on, the machine is in
FAX	LINE	fax mode. If the light is
		not on, press the [FAX]
	DATA
		key.
JOB STATUS	CUSTOM S

	MANUAL
ED	2-SIDED	JOB
ET	TABLET	BUIL

ROTATE THE IMAGE 90 DEGREE

This step is only necessary if you placed the original so that it is oriented horizontally (the top of the original is on the right or left side). Otherwise, go directly to step 6.

2 Place the original. (p.10)3 Touch the [ORIGINAL] key.

If the address directory screen appears, touch the [CONDITION SETTINGS] key to display the condition

settings screen (p.7). After touching the [ORIGINAL] key, check

the original size displayed in the key. If the original size was not correctly detected, set the correct original size. ("MANUALLY SETTING THE SCANNING SIZE" (p.20))

4 Touch the [2-SIDED BOOKLET] key or the [2-SIDED TABLET] key as appropriate for the original you loaded.

ORIGINAL SIZE

AUTOMANUAL

2-SIDED 2-SIDED

BOOKLET TABLET

ROTATE THE IMAG

6				Touch the [OK] key.				2
							You will return to the
							initial screen.
	SIZE					OK
			MANUAL
		2-SIDED			JOB
		TABLET			BUILD
	TATE THE IMAGE 90 DEGREES
A two-sided original icon appears next to the
[ORIGINAL] key.
							Example: The icon that
				STANDARD			appears when the
				RESOLUTION			[2-SIDED BOOKLET]
							key is touched.
			AUTO 8½x11R

ORIGINAL

7 Continue from step 5 of "BASIC PROCEDURE FOR SENDING FAXES" (p.12).

Note	Booklets and tablets	Booklet	Tablet
	Two-sided originals that are bound at the side are booklets, and two-sided
	originals that are bound at the top are tablets.
	Two-sided scanning turns off after the document is stored in memory. Two-sided
	scanning can be canceled by pressing the [CLEAR ALL] key (	).

17