KEY NAME
SHARP CORPORATION
USER 3
FAX No
INDEX
SHARP CORPORATION
NAME
REGISTRATION IS COMPLETED.

PROGRAMMING

9 Use the numeric keys to enter the fax number.

DIRECT ADDRESS / RAPIDNEXT EXIT

001

FAX No.

 

 

CANCEL

 

 

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ENTER THE FAX No. VIA THE 10-KEY PAD, THEN PRESS [OK].

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0666211221

 

 

 

 

 

 

 

 

 

 

 

 

 

PAUSE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SUB ADDRESS

 

To insert a pause between digits of the number, touch the [PAUSE] key. The pause appears as a hyphen "-". See page 97 to set the duration of the pause.

If you make a mistake, press the [CLEAR] key () to clear one digit at a time, and then enter the correct digit(s).

If you are not going to enter a sub-address and password after the fax number, go to step 12.

For information on sub-addresses and

Note

passwords, see "TRANSMISSION

 

BETWEEN MACHINES SUPPORTING

 

F-CODES" on page 51.

The maximum number of digits that can be entered is as follows:

When the destination does not include a sub-address and passcode, 50 digits including the fax number and any pauses (hyphens).

When the destination includes a sub-address and passcode, 92 digits including the fax number, any pauses (hyphens), and slashes "/" (to separate the sub-address and passcode).

10 If you need to enter a sub-address, touch
12 Touch the [OK] key.

You will return to the rapid key programming screen.

"REGISTRATION IS COMPLETED." will appear highlighted to the right of "No.".

The "FAX No." line only shows 32 digits,

Note

regardless of the number of digits stored in

 

 

the number.

13 Check the key name.

The characters appearing next to the [KEY NAME] key will be displayed in the key. Only the first 18 characters of the name entered in step 1 will be displayed.

If you need to change the name that will be displayed in the key, touch the [KEY NAME] key

(If you do not wish to change the name, this step is not necessary).

See page 80 for the

procedure for entering characters.

14 Check the transmission settings

The initial transmission settings are "TRANSMISSION SPEED: 33.6 kbps" and

"INTERNATIONAL CORRESPONDENCE MODE: NONE". To change either of the settings, touch the [MODE] key.

the [SUB ADDRESS] key and then enter the sub-address with the numeric keys.

INITIAL

If you do not wish to change the settings, this step is not necessary.

PRESS [OK].

PAUSE

SUB ADDRESS

When you touch the [SUB ADDRESS] key, a slash is entered after the fax number. Enter the sub-address after the slash (max. 20 digits).

FAX No. 0666211221/3456/987654

MODE

33.6 kbps/NONE

After touching the [MODE] key, you can change either of the two settings. When finished, touch the [OK] key.

If you do not wish to enter a passcode, go to step 12.

Transmission speed

Speed selections are 33.6 kbps, 14.4 kbps, 9.6 kbps, and 4.8 bps. The higher the number, the faster the transmission speed.

11 If you wish to enter a passcode, touch the [SUB ADDRESS] key once again and enter the passcode with the numeric keys.

When you touch the [SUB ADDRESS] key, a

o. VIA THE 10-KEY PAD, THEN PRESS [O

Set the transmission speed only when you Note know what speed is most suitable, such as

when you are sending a fax to a foreign country and telephone line conditions are bad. If you do not know the line condition, do

0666211221/3456/

slash is entered after the sub-address. Enter the passcode after the slash (max. 20 digits).

not change this setting.

68