Sharp AR-M237 4 Press the [START] key (), 9 Press the [START] key ( ), 2 Touch the [PRINT DATA] key, 3 Touch the [PUBLIC BOX] key, Printing documents in the Public Box

ADVANCED TRANSMISSION METHODS

9 Press the [START] key ( ).	To cancel scanning
	Note To cancel scanning of a document while
The document is	scanning is in progress, press the [CLEAR]
	key ( ). To erase the documents in the
scanned. If other	Public Box, see "Deleting documents from
documents have	the Public Box" on page 37.
previously been stored,
the new document will be
added to the previous
documents.

If you used the document glass and have another page to scan, change pages and then press the [START] key () again. Repeat this procedure until all pages have been scanned, and then press the [READ-END] key in the touch panel. "JOB STORED." will appear briefly in the touch panel and then you will return to the condition settings screen.

Printing documents in the Public Box

When documents are stored in the Public Box, an icon will appear to the right of the [PUBLIC BOX] key. To check the stored data, you can print it out.

1 Touch the [SPECIAL MODES] key in fax mode and then touch the [MEMORY BOX] key.

	SUB ADDRESS	If the address book
SPECIAL MODES	ADDRESS REVIEW	screen appears, touch
		the [CONDITION
POLLING	SLOW SCAN MODE
DIRECT TX	MEMORY TX	SETTINGS] key to
PROGRAM	MEMORY BOX	display the condition
		settings screen. (p.7)

4 Press the [START] key ().

"PRINT JOB IN MEMORY. PLEASE WAIT UNTIL PRINT OUT." will appear and the documents will be printed.

2 Touch the [PRINT DATA] key.

POLLING MEMORY

E PRINT DATA

3 Touch the [PUBLIC BOX] key.

Touching the [CANCEL] key will return you to the screen of step 2.

PUBLIC BOX

36