Sharp AR-M237 FAXING A LARGE NUMBER OF PAGES, 5 Touch the [OK] key, 3 Touch the [ORIGINAL] key, 7 Press the [START] key (), 4 Touch the [JOB BUILD] key

STANDARD

RESOLUTION

AUTO 8½x11R

ORIGINAL

BASIC OPERATIONS

FAXING A LARGE NUMBER OF PAGES

When you have a large number of pages to fax, scan the pages in batches using the RSPF. A maximum of 100 pages can be placed in the RSPF at once; however, placing pages in batches allows you to scan in more than 100 pages and send them in a single transmission. Note that the number of pages that can be scanned may vary depending on the content of the pages and how much memory is being used.

1 Make sure that the machine is in fax mode

SCAN		When the [FAX] key light
	DATA is on, the machine is in
FAX	LINE	fax mode. If the light is
		not on, press the [FAX]
	DATA
		key.
JOB STATUS	CUSTOM S

5 Touch the [OK] key.

		You will return to the
SIZE	OK	initial screen.
MANUAL
2-SIDED	JOB
TABLET	BUILD

TATE THE IMAGE 90 DEGREES

2 Place the original. (p.10)

Place the first pages that you wish to scan.

3 Touch the [ORIGINAL] key.

If the address directory screen appears, touch the [CONDITION SETTINGS] key to display the condition

settings screen (p.7). After touching the [ORIGINAL] key, check

the original size displayed in the key. If the original size was not correctly detected, set the correct original size. ("MANUALLY SETTING THE SCANNING SIZE" (p.20))

4 Touch the [JOB BUILD] key.

SIZEOK

MANUAL

2-SIDED JOB

TABLETBUILD

TATE THE IMAGE 90 DEGREES

The many originals icon appears next to the [ORIGINAL] key.

EXPOSURE

STANDARD

RESOLUTION

AUTO 8½x11R

ORIGINAL

6 Perform steps 4 to 6 of "BASIC PROCEDURE FOR SENDING FAXES" (p.12).7 Press the [START] key ().

Scanning of the originals begins. When scanning is finished, the [READ-END] key appears in the touch panel.

18