FAXING A DIVIDED ORIGINAL (DUAL PAGE SCAN)

When faxing a book or other bound document, you can use this function to divide the two open pages of the book into two separate fax pages.

This function can only be used when the original is scanned using the document glass.

The original on the right side of the document glass is scanned first as page 1, and then the original on the left side as page 2.

Dual page scan is only possible when the original size is 11" x 17" or 8-1/2" x 11R".

Your machine

The other machine

 

 

Book or sheet original

Printed out as

two separate pages

When page division is set,

Transmission to

other machine

 

 

[Example]

 

 

Scanned original size

Transmitted document

the original is divided

11" x 17"

Two 8½" x 11" pages

 

 

into two pages when

 

 

scanned into memory

 

 

Selecting Dual Page Scan

Follow the steps below to select Dual Page Scan and then perform the transmission operation.

1 Touch the [SPECIAL MODES] key in fax mode and then touch the [DUAL PAGE SCAN] key.

 

SUB ADDRESS

If the address book

SPECIAL MODES

ADDRESS REVIEW

screen appears, touch

the [CONDITION

 

 

DIRECT TX

MEMORY TX

SETTINGS] key to

 

POLLING

display the condition

 

 

DUAL PAGE

PROGRAM

settings screen. (p.7)

 

 

SCAN

 

 

3 Place the original on the document glass (p.10), and perform the transmission operation.

If you have more originals to scan after pressing the [START] key () and scanning the first original, change originals and repeat scanning until all originals have been scanned. When finished, touch the [READ-END] key in the touch panel. ("Using the document glass" (p.13))

2 Touch the [OK] key.

You will return to the

OK main screen and the dual page scan icon will

1/2 appear.

SCAN MODE

Note

To cancel Dual Page Scan...

Press the [CLEAR ALL] key ( ).

40