Sharp AR-M237 SPEAKER VOLUME SETTING

KEY OPERATOR PROGRAMS

SPEAKER VOLUME SETTING

This setting is used to adjust the volume of the following four types of sounds heard through the speaker.

• SPEAKER • LINE MONITOR

• RINGER VOLUME • TRANSMISSION COMPLETE SOUND

KEY OPERATOR PROGRAMS

VOLUME ADJUSTMENT OK

SPEAKER

RINGER VOLUME

LINE MONITOR

Low Medium High Off

To change a volume setting, touch the desired volume key.

The factory default setting is "Medium".

TRANSMISSION COMPLETE SOUND SETTING

This program is used to select the beep pattern that signals the end of transmission or reception. Touch [PATTERN 1], [PATTERN 2], or [PATTERN 3].

To listen to beep pattern, touch the [CHECK] key. The factory default setting is "PATTERN 2".

TRANSMISSION COMPLETE SOUND TIME SETTING

This program is used to select the length of the beep that signals the end of transmission or reception. Selections are [2.0 sec], [2.5 sec], [3.0 sec], [3.5 sec], and [4.0 sec].

The factory default setting is "3.0 sec".

ACTIVITY REPORT PRINT SELECT SETTING

This setting is used to have an activity report automatically printed at regular intervals.

To have the report automatically printed every 50 transactions (transmissions and receptions), select the [AUTO PRINT AT MEMORY FULL] checkbox. To have the report automatically printed at a specified time each day (only once a day), check the [PRINT DAILY AT DESIGNATED TIME] box and then select the time with the [HOUR] and [MINUTE] keys that appear.

KEY OPERATOR PROGRAMS
ACTIVITY REPORT PRINT SELECT SETTING		OK
AUTO PRINT AT MEMORY FULL
	HOUR	MINUTE
PRINT DAILY AT DESIGNATED TIME	13	01
		AM
		PM

Touch the [HOUR] key and then set the hour by touching the and keys. Set the minute in the same way. Touch [AM] or [PM] and then touch the [OK] key.

[AUTO PRINT AT MEMORY FULL] and [PRINT DAILY AT DESIGNATED TIME] can be simultaneously selected.

The factory default settings are as follows:

•AUTO PRINT AT MEMORY FULL: Disabled

•PRINT DAILY AT DESIGNATED TIME: Disabled

• If you only select the PRINT DAILY AT

Note DESIGNATED TIME setting and the number of recorded transactions exceeds 50 before the specified time, each new transaction will delete the oldest transaction (the oldest transaction will not be printed).

•The activity report can also be printed out on demand. ("PRINTING REPORTS" (p.85))

TRANSACTION REPORT PRINT SELECT SETTING

This setting is used to select the conditions for printing out Transaction Reports. Conditions can be selected for regular transmissions, broadcast transmissions, receptions, and confidential receptions.

KEY OPERATOR PROGRAMS
TRANSACTION REPORT PRINT SELECT SETTING		OK
SINGLE SENDING	BROADCASTING	1/2
PRINT OUT ALL REPORT	PRINT OUT ALL REPORT
PRINT OUT ERROR REPORT ONLY	PRINT OUT ERROR REPORT ONLY
NO PRINTED REPORT	NO PRINTED REPORT

Touch the key to display the next setting. Select the print conditions for receptions and confidential receptions.

KEY OPERATOR PROGRAMS
TRANSACTION REPORT PRINT SELECT SETTING		OK
RECEIVING	CONFIDENTIAL RECEPTION	2/2
PRINT OUT ALL REPORT	PRINT OUT NOTICE PAGE
PRINT OUT ERROR REPORT ONLY	NO PRINTED REPORT
NO PRINTED REPORT

The factory default settings are as follows:

•SINGLE SENDING: PRINT OUT ERROR REPORT ONLY

•BROADCASTING: PRINT OUT ALL REPORT

•RECEIVING: NO PRINTED REPORT

•CONFIDENTIAL RECEPTION: PRINT OUT NOTICE PAGE

98