SHARP GROUP
ARP CORPORATION
CORPO. TPS
ACC.#-C

TRANSMISSION USING F-CODES

PROCEDURE FOR F-CODE POLLING

Make sure that a document has not been placed in the RSPF or on the document glass, and then follow the steps below.

• You must know the sub-address (SEP) and passcode (PWD) of the other machine's F-code polling memory

Note box.

•Serial polling (selecting multiple fax machines to be polled using a group key or by touching the [NEXT ADDRESS] key) is not possible with F-code polling.

1 In fax mode, touch the [SPECIAL MODES] key and then the [POLLING] key.
3 Enter the fax number, sub-address, and passcode of the other fax machine.

 

SUB ADDRESS

SPECIAL MODES

ADDRESS REVIEW

DIRECT TX

POLLING

 

DUAL PAGE

PROGRAM

SCAN

 

If the address book screen appears, touch the [CONDITION SETTINGS] key to display the condition settings screen. (p.7) The [POLLING] key is highlighted and the

P

To use a rapid key, touch the [ADDRESS BOOK] key to display the address book screen. See "ENTERING A SUB-ADDRESS AND PASSCODE FOR A MEMORY BOX IN THE

polling icon is displayed.

To cancel the polling selection, press the [POLLING] key once again so that it is no longer highlighted.

OTHER MACHINE" on

page 53 for the procedure for entering sub-addresses and passcodes.

2 Touch the [OK] key.

 

You will return to the

OK

condition settings screen.

 

1/2

SCAN MODE

4 Press the [START] key ().

"JOB STORED." appears on the screen.

After communicating with the other machine, your machine prints the received document.

To cancel the operation

Note Press the [JOB STATUS] key and then cancel the operation as explained on page 24. Only one F-code polling operation with a timer setting (p.30) can be stored.

56