KEY OPERATOR PROGRAMS

F-CODE MEMORY BOX

This program is used to program memory boxes for F-code communication. Three types of memory boxes can be programmed: F-code memory polling boxes, F-code confidential boxes, and F-code relay broadcast boxes. Follow the procedure below to program, edit, or delete a memory box.

Programming an F-code memory box

A box name, sub-address, password, and specific functions are programmed in a memory box.

•

When programming a memory box, the

Note

same sub-address as a previously

 

programmed memory box cannot be used.

 

However, the same passcode can be used.

•A passcode can be omitted.

•Up to 10 F-code memory boxes can be programmed. If you attempt to program a memory box when 10 boxes have already been programmed, a warning message will appear and programming will not be possible. Delete any unneeded F-code memory boxes (p.105) and then program the new box.

1Touch the desired type of memory box ([POLLING MEMORY], [CONFIDENTIAL], or [RELAY BROADCAST]) in the upper row of keys.

KEY OPERATOR PROGRAMS

 

F-CODE MEMORY BOX

OK

6 To enter a passcode, touch the [PASS CODE] key.

A slash (/) appears after the sub-address.

If you make a mistake, press the [CLEAR] key () and then enter the correct number.

7 Use the numeric keys to enter a passcode (maximum of 20 digits).

•Numbers and "" and "#" can be used in a passcode.

•If you make a mistake, press the [CLEAR] key () and then enter the correct number.

8 Touch the [OK] key.

You will return to the memory box programming screen. The entered sub-address and passcode will appear. "REGISTRATION IS COMPLETED." will appear next to the box "No.".

9 Touch the [NEXT] key or the [EXIT] key.

•To program another memory box, touch the [NEXT] key.

•To exit, touch the [EXIT] key.

Next, program specific functions of the memory box as indicated below:

•F-code confidential box (print passcode: page 104)

•F-code relay broadcast box

(end receiving machines: page 104)

STOREPOLLING MEMORY CONFIDENTIAL

AMEND/DELETE POLLING MEMORY CONFIDENTIAL

RELAY

BROADCAST

RELAY

BROADCAST

(The following uses [POLLING MEMORY] as an example.) The F-code memory box programming screen appears.

2

Touch the [BOX NAME] key.

 

 

• The lowest box number that has not yet been

 

 

programmed will automatically appear in "No.".

 

 

• The character entry screen appears. Enter a name for

 

 

the box (maximum of 36 characters).

8

 

• To enter characters, see "ENTERING

 

CHARACTERS" on page 80.

3

Touch the [OK] key.

 

 

4

Touch the [SUB ADDRESS] key.

 

 

The sub-address/passcode entry screen appears.

 

5 Use the numeric keys to enter a sub-address (maximum of 20 digits).

•The characters and # cannot be used in a sub-address.

•If you make a mistake, press the [CLEAR] key () and then enter the correct number.

•If you do not wish to enter a passcode after entering the sub-address, go directly to step 8.

103