SX66 User Manual | 83 | |
|
|
|
By default your device detects incoming infrared (IR) and Bluetooth beams and prompts you to accept them. If you do not want your SX66 to detect or receive beams, clear the Receive all incoming beams check box.
NOTE: If someone attempts to send you an IR beam from an older device, you may not be prompted to accept it. In this case, before the beam is sent from the other device, tap Receive an infrared beam at the bottom of the Beam screen.
Bluetooth:
1.Make sure that your SX66 is configured to receive incoming beams.
2.Make sure that your SX66 is turned on, discoverable, and within 10 meters (about 30 feet) of the other device beaming the information.
3.When prompted to receive an incoming beam, tap Yes to accept the beam.
For more information about Bluetooth and its settings, please see Chapter 6.
4.4 ActiveSync Errors
Whenever ActiveSync cannot successfully synchronize your information, it displays an error on your SX66.
Viewing error information
Press the Action button when the error text is displayed. ActiveSync will then display more information about the error that occurred.
Some types of errors can interfere with automatic synchronization. If you suspect that a scheduled automatic synchronization has not occurred, you should attempt to manually synchronize your information. Successfully completing manual synchronization will reset automatic synchronization. For more information, see the Synchronizing Information sec- tion of ActiveSync Help on your PC.