SX66 User Manual 54
SX66 User Manual
55
Converting writing into text:
1. On the writing note, tap Tools and Recognize from
the menu bar.
2. If you want to convert only certain words, select them
before tapping Recognize on the Tools menu (or tap
and hold the selected words and then tap Recognize
on the pop up menu).
If a word is not recognized, it will be left as writing. And if the
conversion is incorrect, you can select different words from
a list of alternates, or return to the original writing.
Tap and hold the incorrect word (tap one word at a time),
then tap Alternates from the pop-up menu. A menu with a
list of alternate words appears. Tap the word you want to
use, or tap the writing at the top of the menu to return to
the original writing.
Tips for good recognition:
1. Write neatly.
2. Write on the lines and draw descanters below the line.
Write the cross of the “t” and apostrophes below the top
line so that they are not confused with the word above.
Write periods and commas above the bottom line.
3. For better recognition, use a zoom level of 150% or
higher by tapping Tools > Zoom to change the zoom
level.
4. Write the letters of a word closely and leave big gaps
between words so that the device can easily tell where
words begin and end.
5. Hyphenated words, fore ign words that use spe cial
characters such as accents, and some punctuation
cannot be converted.
If you edit or add to a word after attempting to recognize it,
the new writing will not be included if you attempt to recog-
nize it again.
The writing is
converted into
typed text