42SX66 User Manual

Recharging your device

You can recharge your device in the following ways:

1. Place your SX66 in the cradle and connect it to an external power source with the travel charger. Before using your SX66 for the first time, charge the battery for at least 8 hours. Place it in the cradle for a short time each day to recharge the battery to its full capacity.

Connect to your SX66's Sync connector

2.Connect the travel charger into the optional

USB cable plug. Connect your SX66 directly to an external power source.

Connect the Travel charger plug to the USB cable plug

Connect the USB synchronization cable to your PC

Plug the Travel charger into an electrical outlet

3.Plug the travel charger into the optional DC connector converter. Connect the Travel charger of your SX66 directly to an external power source without using the cradle.

Connect to the

Connect to

sync connector of

the Travel

your SX66

charger

4.If you have a spare battery for your SX66, you can also put it into the cradle slot to recharge.

Put a spare battery into the slot to recharge

Page 42
Image 42
Siemens SX66 manual Recharging your device