SX66 User Manual

147

 

 

 

Changing the display name of your MIDlets

You can change the displayed name of any MIDlet on your SX66. However, you cannot change the names of MIDlet suites.

1.Tap and hold the MIDlet you wish to change the name of and the then select Rename from the pop-up menu.

2.Enter the new name for your MIDlet in the dialogue box and press OK to confirm, or Cancel to abort.

Un-installing MIDlets/MIDlet suites

You can remove MIDlets/MIDlet suites from your SX66’s memory. To do this, ensure that the MIDlets/MIDlet suite is not running.

1.Select the MIDlets/MIDlet suite in the MIDlet Manager window and choose Un-install.

2.You will be asked to confirm your decision by selecting the OK option. The MIDlet is then erased from your SX66’s memory.

You cannot un-install a single MIDlet from a MIDlet suite. You must un-install the complete MIDlet suite.

To assign a group to a MIDlets/MIDlet suite

1.Tap and hold on a MIDlet you wish and choose Group from the pop up menu in the MIDlet Manager window.

2.The MIDlet Manager window contains a drop down box with a list of group names. Choose one of these and tap OK.

You can adapt existing groups to meet your needs. Once a MIDlet has been assigned to a group, that group’s name will appear on the Show menu, and you can choose any group

and view the MIDlets in it.

System Info

You can see the information about the currently used space of the MIDlets/MIDlet suite you have selected by tapping Menu > System Info. If the manufacturer has limited the total storage space for MIDlets, the limit and the amount currently available is also shown.

Page 147
Image 147
Siemens SX66 manual Changing the display name of your MIDlets, Un-installing MIDlets/MIDlet suites, System Info, 147