Sigma LBA-300, LBA-710, LBA-714PC Total Energy, What is the Clip Level and how is it used?

Ultracal! every 10 to 15 minutes, or whenever you think your camera may have strayed. This drift can be observed as changes in the background noise image. Un-illuminated areas will appear as gray and dark violet (almost black) random noise. If the background starts to look too gray then the baseline is drifting negative. If too dark, then the baseline is drifting positive. Note: These colors apply to the Continuous 128 color palette. They change depending upon the palette selection.

6.5 Clip Level

What is the Clip Level and how is it used?

The clip level is a processed energy pixel value. Only those pixel values that exceed the clip level are used in computing the following results:

•Beam Widths, if Percent of Energy or Peak methods are selected.

•Centroid Location.

•Elliptical beam Orientation.

•Top Hat: Mean, Standard Deviation, Min and Max, when in Data mode only.

•Effective Area.

Depending upon the Beam Width Method, the clip level value is determined as follows:

•With the 4-Sigmaand Knife-Edgemethods and with the Top Hat results disabled, the LBA totals the pixel energy values in descending order until it finds the pixel which causes the sum to exceed 86.5% of the total energy value. The raw energy value of this pixel becomes the clip level.

•With the 4-Sigmaand Knife-Edgemethods and with the Top Hat results enabled, the LBA sets the clip level to the value that is equal to 80% of the current peak energy value.

•With the Percent of Energy method, the LBA totals the pixel energy values in descending order until it finds the pixel which causes the sum to exceed the set Clip% of the total energy value. The energy value of this pixel becomes the clip level.

•With the Percent of Peak method, the LBA sets the clip level to the value that is equal to the set Clip% of the current peak energy value.

The number of pixels with values above the clip level establishes the Effective Area of the beam. The locations of the pixels with values above the clip level are used to determine the beam's Centroid Location and Elliptical beam Orientation.

Note: When using a Knife Edge method, the Clip% value relates only to the Knife Edge measurement process, and not to the above Clip Level description.

6.6 Total Energy

The cameras used with the LBA-PC are not calibrated to directly provide energy of a laser beam. The Energy of Beam dialog box edit control lets you calibrate the LBA-PC to the energy of your laser. You must measure the energy of your beam using an external measuring device, then enter the energy here. The value entered must be the total energy of the beam for the frame currently displayed. For accurate results, the beam must fit inside of the current Pan/Zoom window.

If you enter a calibrated value of zero, the Total, Peak, Gauss Height(s), and Top Hat results are displayed as processed digitizer values. Any entry other than zero will immediately appear as the Total

Operator’s Manual 130 LBA-PC