Sigma LBA-700, LBA-710, LBA-714PC, LBA-300 FRM and RDD are ignored if the LBA-PC is Not in remote

	Key	Type	Value Description
	DataLogging	B	Data logging enable.
	DataFileName	S	Name of data log file.
			If no extension (i.e., no period) then
			.LB3/4/5/7 is appended.
			Maximum 256 characters.
			If this key is set to “FRM” or “RDD” (case
			ignored) (or was previously set to FRM or
			RDD in the dialog) then data frames will be
			logged to the GPIB bus. Each time a new
			frame is captured the LBA-PC will
			automatically send a response as if you had
			sent “:FRM?” or “RDD?” respectively. You
			must address the LBA-PC to talk and be
			prepared to accept the transmitted data.
			The LBA-PC will wait until you have read the
			data before capturing another frame. Note:
			FRM and RDD are ignored if the LBA-PC is
			not in remote.
	ResultsLogging	B	Results logging enable.
	ResultsFileName	S	Name of results log file.
			If no extension (i.e., no period) then .RLG is
			appended.
			Maximum 256 characters.
			If this key is set to “RDR” (case ignored) (or
			was previously set to RDR in the dialog) the
			results will be logged to the GPIB bus. Each
			time results are computed for a new frame
			the LBA-PC will automatically send a
			response as if you had sent “:RDR?
			Values=1”. The LBA-PC will wait until you
			have read the data before capturing another
			frame. Note, in this case the results format
			is ignored. Note: RDR is ignored if the LBA-
			PC is not in remote.
	ResultsFormat	L	Results log format.
			0 = math
			1 = spreadsheet
	ExportLogging	B	Export logging enable.
	ExportFileName	S	Name of export log file. Any file extension is
			ignored and an appropriate extension is used
			depending on the type of export file that is
			being logged.
	BMP	B	.BMP logging enable.
Operator’s Manual			222	LBA-PC