Sigma LBA-712, LBA-710, LBA-714PC, LBA-300, LBA-708, LBA-500PC, LBA-700, LBA-400 SDD save data to file

Key	Type	Value Description
		1 to n. ‘n’ is the number of records in the file.
NumberRecords	I	0 = all records (up to frame buffer size)
		1 to n. ‘n’ is the size of the frame buffer.
		forced to 1 when StartFrame < 1
StartFrame	I	First frame saved.
		-1 = gain frame
		0 = reference frame
		1 to n. ‘n’ is the size of the frame buffer
		default = current frame
Replace	B	true = replace
		If the camera or the camera resolution stored in
		the file do not match the current configuration
		then the LBA-PC must replace the current
		camera or change the resolution before the
		frame can be loaded. Either of these changes
		results in clearing the frame buffer (i.e., all
		current frames are discarded). If the pixel scale
		stored in the file does not match the current
		pixel scale then the pixel scale will be set to the
		value in the file.
		false = do not replace
		If the camera or camera resolution stored in the
		file do not match then an error is generated.
		forced to false when StartFrame < 1
		default = false

A.5.1.4 SDD - save data to file

NOTE: There is no default path for this command. If you want the to be saved in a particular path then send the path with the file name.

:SDD <configuration>1,3 :SDD?

Key	Type	Value Description
FileName6	S	Name of file to load.
		If no extension (i.e., no period) then .LB3/4/5/7
		is appended to data, reference, and ultracal
		frames. .GAI is appended to gain frame files.

Operator’s Manual	219	LBA-PC
Doc. No. 10654-001, Rev 4.10