Sigma LBA-500PC, LBA-710, LBA-714PC, LBA-300, LBA-712, LBA-708, LBA-700, LBA-400 manual LOC go to local

Key	Type	Value Description
		5	= 32x
EnergyOfBeam4	F	calibrated energy of beam entered in
		Computations dialog
EnergyOfFrame4	F	raw frame total equivalent to
		EnergyOfBeam
EnergyUnits4	L	0 = j
		1	= mj
		2	= uj
		3	= nj
		u = pj
		5	= w
		6	= mw
		7	= uw
		8	= nw
		9	= pw
		10 = fl
AC4	L	-1 = ultracal was on but capture location,
		frame size, or resolution did not match
		0	= ultracal off
		>0 = ultracal subtracted
RS4	L	-1 = reference subtract was on but capture
		location, frame size, or resolution did not
		match
		0	= reference sub off
		1	= reference sub subtracted
GC4	L	-1 = gain correct was on but capture
		location, frame size, or resolution did not
		match
		0	= gain correct off
		1	= gain correct multiplied
CommentLine3	S	up to 256 characters
WriteProtect3	B	1 = cannot overwrite this frame

A.5.4.8 LOC - go to local

When the LOC message is sent or when the LBA-PC goes from remote to local via the REN line then local control is restored (equivalent to password lockout being disabled).

Operator’s Manual	253	LBA-PC
Doc. No. 10654-001, Rev 4.10