Sigma LBA-712, LBA-710, LBA-714PC, LBA-300, LBA-708, LBA-500PC, LBA-700 FST frame status information

n..n	=	number of data bytes
(DAB)	=	data byte - 8-bit data byte
Key			Type	Value Description
FrameNumber			I	frame number
				-1 = gain frame
				0 = reference frame
				1 to n. ‘n’ is the size of the frame buffer.
				default = current frame
Replace			B	default = false
				true = replace
				If the camera or the camera resolution
				stored in the file do not match the current
				configuration then the LBA-PC must replace
				the current camera or change the
				resolution before the frame can be loaded.
				Either of these changes results in clearing
				the frame buffer (i.e. all current frames are
				discarded). If the pixel scale stored in the
				file does not match the current pixel scale
				then the pixel scale will be set to the value
				in the file. If the energy calibration stored
				in the file does not match the current
				energy calibration then the energy
				calibration will be set to the value in the
				file.
				false = do not replace
				If the camera or camera resolution do not
				match then the LBA-PC will issue an error
				and the frame is not loaded. The pixel
				scale and energy calibration values will not
				be changed.

A.5.4.7 FST - frame status information

:FST <configuration>1,3 :FST? [FrameNumber=f]

Returns:

FST <configuration>2

Operator’s Manual	251	LBA-PC
Doc. No. 10654-001, Rev 4.10