Sigma LBA-400 General VI Examples for the LBA-PC, Save Configuration, Semicolon String to Array

Input	Output
1. GPIB address	1. Error out

2.Run/Stop boolean

3.Error in

B.2.20 Save Configuration .vi

Description: Save a configuration file to remote machine.

Input	Output
1. GPIB address	1.Error out

2.CFG file name string

3.Error in

B.2.21 Semicolon String to Array .vi

Description: Translate a string with semicolon delimiters to an array.

Input	Output
1. Input string	1. The array
	2. The total # of rows in the
	array

B.2.22 Set Energy and Units .vi

Description: Set the quantity of energy and energy unit (set zero to re-init).

Input		Output
1.	GPIB address	1. Error out
2.	Energy
3.	Unit
4.	Error in

B.3 General VI Examples for the LBA-PC

The following examples demonstrate how to use the above SubVI’s to build laser beam diagnostic LabVIEW virtual instrument applications. Two of these examples are described below in detail. The remaining are covered with a brief description of their operation. All of these examples are contained in the LBA-PC.LLB library file.

Operator’s Manual	271	LBA-PC
Doc. No. 10654-001, Rev 4.10