Sigma LBA-714PC, LBA-710, LBA-300, LBA-712, LBA-708, LBA-500PC, LBA-700, LBA-400 Message Generated By

Message	Generated By
Error in directory path or file name.	File Load
	File Save As
Start record (%ld) is beyond the end of the file	File Load
(%ld).
Start record plus number records (%ld) is beyond	File Load
the end of the file (%ld).
This is not a valid LBA-PC data file.	File Load
	File Save As
File's camera does not match configuration camera.	File Load
Press OK to change the configuration camera.
File's resolution (%d) does not match configuration	File Load
resolution (%d). Press OK to change the resolution
to '%d'.
File's pixel scale (%.3le) does not match	File Load
configuration pixel scale (%.3le). Do you want to
change the pixel scale to %.3le?
This is not a Demo frame.	File Load
	File Save As
File's camera does not match configuration camera.	File Save As
File's resolution (%d) does not match configuration	File Save As
resolution (%d).
Cannot write to file created by previous version of	File Save As
LBA-PC.
Not enough memory for PassFail buffers. PassFail	results
will be disabled.
Not enough memory for Computations buffers.	results
Computations will be disabled.
Error Loading WING.DLL: %d
LBA-PC device driver not found. LBA-PC set to Off-	device driver
Line mode.
Frame Grabber not found. LBA-PC set to Off-Line	device driver
mode.
Device Driver v%d.%d detected. LBA300-PC	device driver
requires v%d.%d. 300-PC set to Off-Line mode.

Operator’s Manual	249	LBA-PC
Doc. No. 10654-001, Rev 4.10