Sigma LBA-700, LBA-710 ORG set manual origin to cursor location, 4.10 PAL? read color palette

When in local control mode, any remote logging (:LOG) or synchronization (:SYC) is disabled, or cannot be enabled. The remote logging state is stored in the configuration. Remote logging is automatically re-enabled when the LBA-PC is returned to remote mode and the file name is FRM, RDD, or RDR.

:LOC

Returns:

LOC

A.5.4.9 ORG - set manual origin to cursor location

This command is valid only when origin is set to manual (see :DIS). :ORG

A.5.4.10 PAL? - read color palette

This command retrieves the color palette currently used to display the beam on the LBA-PC. The LBA-PC uses a base palette of 128 colors to display pixels in the range of 0 to 255.

:PAL?

Returns:

PAL #3384(RDAB)(GDAB)(BDAB)…(RDAB)(GDAB)(BDAB)

Where:

#= pound symbol

3 = number of digits to follow

384= number of data bytes to follow (RDAB)(GDAB)(BDAB) = 24 bit red, green, blue color value

A.5.4.11 PAN - pan left/right/up/down

:PAN <configuration>

	Key	Type	Value Description
	X	I	new upper left corner [+-]x
			-x = move left by x
			x = new location - see :PNW? for limits
			+x = move right by x
			C = center horizontally
	Y	I	new upper left corner [+-]y. Note that the
			top is 0 and y values always increase going
			down.
Operator’s Manual			254	LBA-PC