Sigma LBA-500PC, LBA-710, LBA-714PC, LBA-300, LBA-712, LBA-708, LBA-700, LBA-400 Return ESE contents

Command	Meaning	Usage
*ESE	Event Status	Sets mask to enable event status
	Enable	notification of corresponding bits set in
		ESR.
*ESE?		Return ESE contents.
*ESR?	Event Status	Return and clear ESR contents:
	Register	bit 7 - Power on.
		bit 6 - User Request (unused).
		bit 5 - Command Error flag, set when host
		sends a command that is not recognized.
		bit 4 - Execution Error flag, set when the
		host commands the LBA-PC to perform a
		task which is preempted by other
		conditions (e.g. some configurations
		cannot be set while running, path does
		not exist, illegal file name, etc.)
		bit 3 - Device Dependent Error flag
		(unused).
		bit 2 - Query Error flag, data in output
		queue has been lost.
		bit 1 - Request Control (unused).
		bit 0 - Operation Complete flag, set when:
		Ultracal done (only if Ultracal successful)
		AutoExposure done
		Generate Gain done
		Block Capture done
		Logging done
		Post Process done (only if stop not caused
		by error)
		Statistics done
		Print done
*SRE	Service	Set mask to enable service request
	Request	notification of corresponding bits in STB.
	Enable
*SRE?		Return SRE contents.
*STB?	Status Byte	Returns Status Byte contents:
		bit 7 - unused
		bit 6 - Master Summary Status, MSS, set
		whenever an unmasked status condition
		exists (STB & SRE).

Operator’s Manual	213	LBA-PC
Doc. No. 10654-001, Rev 4.10