Sigma LBA-708, LBA-710, LBA-714PC, LBA-300, LBA-712 Start LBA-PC, Second Method Windows 2000 or XP

Step 7) Double click the file in the LBA-PC folder named “Setup.exe” to launch the install. (The windows file extensions, for this folder, must be set to viewable to see the “exe” extension.)

Step 8) Follow the instructions in the installation dialogs. Step 9) Reboot when installation is complete.

Step 10) LBA-PC should now be installed.

Second Method (Windows 2000 or XP):

Step 11) Start Windows.

Step 12) Close all other Windows applications. Step 13) Place the CD in the CD-ROM drive

Step 14) Click Cancel when Windows asks you, “What do you want to do? Step 15) From the Taskbar, click on Start, and then Run…

Step 16) In the Open line type: R:\LBA-PC\setup.exe and press <Enter> (Where “R” is the letter of your CD-ROM drive).

Step 17) Follow the directions given in the installation dialogs. Step 18) Reboot when installation is complete.

Step 19) LBA-PC should now be installed.

Note: After the installation is completed, The install dialogs will ask you if you want to restart windows, you must answer yes to allow windows to restart and load the drivers, otherwise LBAPC will not function properly.

Note: Be sure to look at the LBA-PC ReadMe.txt file, before starting the LBA-PC application. This will bring you up to date with any last minute information regarding the current version of the program.

The following Windows display settings may need adjustment to accommodate the LBA-PC Application. Use Control Panel, Display, and Settings tab to make these adjustments:

•Screen resolution should be set for a minimum display size of 1024x768, bigger is better.

•Color Quality should be set to a minimum of 256 colors.

2.1.4Step 4 Start LBA-PC

It’s recommended that you read portions of this operator’s manual to become familiar with the operation and capabilities of the LBA-PC. The operator’s manual may be found on the installation disk in PDF format. The PDF may also be found on the Spiricon web site at www.spiricon.com, just following the LBA-PC product links. To start the Laser Beam Analyzer application go to windows taskbar and select:

Start, Programs>, Spiricon>, LBA-PC>, LBA-PC.

Operator’s Manual 20 LBA-PC