Note: If you purchased the optional 4 camera adapter, or the optional digital adapter then make sure that the slot immediately to the left (viewed from the front of your PC) of the above PCI slot is also empty, and remove its rear filler bracket also.

Figure 1

Carefully plug your LBA-PC frame grabber card into the PCI slot. Make sure that it is fully seated in the PCI connector. Secure the end bracket with the screw that held in the filler plate. (See figure below)

Figure 2

Operator’s Manual

16

LBA-PC

Page 16
Image 16
Sigma LBA-710, LBA-714PC, LBA-300, LBA-712, LBA-708, LBA-500PC, LBA-700, LBA-400 manual Lba-Pc