Sigma LBA-714PC, LBA-710 manual LBA-PC Configuration Commands, File Menu, LDC restore configuration

Type	Description
F	Fixed/Floating. ASCII numeric value in fixed or floating point
	notation.
S	String. Series of ASCII characters. Note that the backslash,
	“\” has special meaning in strings known as an escape
	sequence. To specify a single backslash you must send two.
	For example: “c:\\spiricon\\lba300pc\\lbapc.cfg” is
	interpreted as “c:\spiricon\lba300pc\lbapc.cfg”. Although other
	escape sequences are recognized, there is no reason to use
	them with the LBA-PC.
T	Time. ASCII numeric integer values in the form
	[[HHH:]MM:]SS.
D	Date. ASCII numeric integer values in the form MM/DD/YY.

A.5 LBA-PC Configuration Commands

A.5.1 File Menu

If a key is not specified with the command then the default is the last value set via restore config, or a previous command (unless otherwise specified in the description).

Many commands can generate error messages. See the :ERR? query command for a list of error messages

Range checking is performed on all values in key=value for each transmitted command. If any value is invalid or out of range then the entire command is ignored and the Range Error flag is set in ELR.

All footnote references can be found on the last page of this Appendix.

A.5.1.1 LDC - restore configuration

NOTE: There is no default path for this command. If you want the configuration to be restored from a particular path then send the path with the file name.

:LDC <configuration>1,3 :LDC?

Key	Type	Value Description
ConfigFileName6	S	Name of configuration file to load.
		If no extension (i.e. no period) then .CFG is

Operator’s Manual	217	LBA-PC
Doc. No. 10654-001, Rev 4.10