Sigma LBA-708, LBA-710, LBA-714PC, LBA-300, LBA-712, LBA-500PC, LBA-700 manual Export Image… dialog box

entries. The Summed image is organized Horizontal data first, left to right, followed by a carriage return, and then the Vertical data, top to bottom.

Note: Exported image files cannot be read back into the LBA-PC’s frame buffer. Use Save As... and Load... for retrievable data files.

3.1.3.1Export Image… dialog box

Enter the drive:\paths\and <filename> of the Export File Name that you want to create. Press Browse... if you want to overwrite an existing file, and you are not sure of the file’s name or location and wish to search for it.

Figure 8

Enter the Start Frame buffer location from which you want to begin exporting image data files.

If you wish to save multiple images, enter the Number of Frames that you want to export. Multiple export images can only be saved sequentially from the Start Frame location. You can specify 0, or 1 to the number of frames in the frame buffer. 0 means all the frames in the frame buffer.

When Exporting multiple images, each image will be placed into a separate file. The file name will automatically have a six-digit number appended to the entered file name. This number will designate each file in the sequence starting with 000000 and counting up. Thus a given multiple export will create a series of files that will appear as follows:

Operator’s Manual 36 LBA-PC