Maintenance | en |
|
Lubrication
Lubricate the unit at the locations shown in Figures 30 to 32 as well as the lubrication points listed.
•Generally, all moving metal parts should be oiled where contact is made with other parts.
•Keep oil and grease off belts and pulleys.
•Wipe surfaces clean before and after lubrication.
NOTE: Use grease fittings when present. Automo- tive lithium grease is recommended.
Models with grease fittings: Lubricate with grease gun.
Apply grease with a brush to areas shown.
Lubricate the areas shown with engine oil.
Figure 30. Tractor Lubrication Points
Figure 31. Mower Deck Lubrication Points | Figure 32. Arbor Lubrication Points |
29
