Operation
Use the Speed Control Pedals
The drive system uses a Hydrostatic Automatic Drive Transmission. The hydrostatic transmission is very easy to operate. This type of drive system does not re- quire a shift lever or a clutch pedal.
The speed and direction of travel is controlled by a for- ward speed control pedal and reverse speed control pedal operated with your right foot.
NOTE: Do not use the left brake pedal in normal opera- tion. Only use the left brake pedal to quickly stop in an emergency.
Drive Forward
1.The automatic drive disconnect must be in the DRIVE position (see A, Figure 12).
2.Slowly release your left foot from the brake pedal (see Figure 13).
3.Move the throttle control to the FAST position (see Figure 8).
4.Slowly push the forward speed control pedal (1) to enable forward ground speed (see Figure 14).
5.To increase forward speed, slowly push down on the forward speed control pedal. To reduce forward speed, slowly release the forward speed control pedal until the unit slows to the desired speed.
Drive In Reverse
1.Before driving in reverse, look to the rear. Look behind and down for small children to ensure safety.
2.Remove your foot from the forward speed control pedal (1) (see Figure 14).
3.Slowly push the reverse speed control pedal (2) to enable reverse ground speed.
4.To increase reverse speed, slowly push down on the reverse speed control pedal. To reduce reverse speed, release the reverse control pedal until the unit slows to the desired speed.
en |
B |
A |
Figure 12
Figure 13
16
