Operation | en |
| |
| 3 |
| 1 |
| 4 |
2 | 5 |
11 | 6 |
8 | 7 |
| |
9 |
|
| 10 |
Figure 7
Location of Controls
Throttle Control Lever (1): Use the throttle control lever to increase or decrease engine speed (see Figure 7). Move the throttle up to increase engine speed and down to decrease engine speed. Always operate at FULL throttle.
Clutch/Brake Pedal (2): The pedal has two functions. The first function is a clutch. The second function is a brake.
Ignition Switch (3): Use the ignition switch to start and stop the engine. Never leave the ignition switch in the RUN position with the engine stopped. This drains the battery.
Parking Brake Knob (4): The parking brake knob is used to lock the parking brake when the tractor is stopped. Fully depress the brake pedal and pull up on the knob to engage the parking brake.
Forward Speed Control Pedal (5): The tractor’s forward ground speed is controlled by the forward speed con- trol pedal. Depress the pedal to increase forward ground speed.
Reverse Speed Control Pedal (6): Use the reverse ground speed pedal to control the reverse ground speed of the tractor.
Lift Lever (7): The lift lever controls the mower cutting height. There are six cutting height levels available (1 - Lowest Cut, 6 - Highest Cut).
Blade Rotation Control (8): Use the blade rotation con- trol to start and stop the rotation of the blade. Pull up on the switch to engage the blade rotation control and push down to disengage.
Fuel Tank (9): To add fuel, remove the filler cap. Be sure to leave room for heat expansion.
Grass Bagger Handle (10): The grass bagger handle opens the bagger so that it can be emptied and closed for mowing.
Seat Adjustment Lever (11): Pull up on the lever to ad- just the location of the seat. Release lever to lock seat in place.
13
