Troubleshooting Chart |
| en | |
|
| ||
Problem |
| Solution | |
|
|
| |
The unit will not move when the brake is | 1. | Check the motion drive belt. Make sure the belt is installed correctly. | |
released and the speed control pedal is |
|
| |
2. | Adjust the clutch. | ||
depressed. | |||
|
| ||
3. | Replace the motion drive belt. | ||
| |||
|
|
| |
| 4. | Release the Automatic Drive Disconnect under the seat. | |
|
|
| |
The unit moves slower or stops when the | 1. | Adjust the clutch. | |
clutch is engaged. |
|
| |
2. | Replace the motion drive belt. | ||
| |||
|
|
| |
The unit moves slower or stops when the | 1. | Adjust the clutch. | |
speed control pedal is depressed. | 2. | Replace the motion drive belt. | |
|
|
| |
When the clutch/brake pedal is released, belt | 1. | Temporary belt noise does not change the operation of the unit. If | |
noise can be heard. |
| belt noise is continuous, check the routing of the belt. Make sure the | |
|
| belt is inside all belt guides. | |
|
|
| |
| 2. | If the noise is continuous, adjust the clutch. | |
|
|
| |
The rear wheels spin over uneven terrain. | 1. | Check the front axle. If the front axle does not freely pivot, loosen the | |
|
| axle bolt(s). | |
|
|
| |
The transaxle is difficult to shift between | 1. | Check the clutch adjustment to make sure the belt stops when the | |
gears with the engine running and the clutch |
| clutch pedal is depressed with the transaxle in (N) neutral. | |
depressed. |
|
| |
2. | Check the belt guides around the transaxle drive pulley. Make sure | ||
|
| the belt guides do not touch the pulley. | |
|
|
|
36