Maintenance
Remove and Install the Motion Drive Belt
1.Remove the mower deck. See the instructions to “Remove and Install the Mower Deck”.
2.Completely push the pedal forward and engage the parking brake.
3.Remove the nuts (1) and idler pulleys (2) (see Figure 33).
4.Loosen the belt guides (3) and (4) from the stack pulley.
5.Remove the motion drive belt (5) from the drive pulley and stack pulley.
4 |
|
| 3 |
| 5 |
2 | 2 |
1 | 1 |
Figure 33
6.A correct replacement part or assistance is avail- able from an authorized service center.
7.Reverse the above steps to install the motion drive belt.
8.Check the routing of the motion drive belt. Make sure the motion drive belt is installed correctly on the idler pulley. Make sure the motion drive belt is inside all the belt guides.
9.Before you use the unit, check the adjustment of the clutch. See the instructions to “Check and Ad- just the Clutch”.
10.Install the mower deck. See the instructions to ”Remove and Install the Mower Deck”.
en
Remove and Install the Mower Drive Belt
1.Remove the mower deck. See the instructions to “Remove and Install the Mower Deck”.
2.Disconnect the extension spring (1) from the mower deck post.
3.Loosen the belt guide (2) from the drive pulley (see Figure 34).
4.Remove the flange nut (3) from the top of the idler pulley (4) and remove the idler pulley.
5.Remove the mower drive belt (5).
NOTE: Replace the mower drive belt with an original equipment belt from an authorized service center.
6.A correct replacement part or assistance is avail- able from an authorized service center.
2 | 4 | 3 | 5 |
| 1 |
|
|
| 1/2 |
|
|
Figure 34
7.Reverse the above steps to install the mower drive belt.
8.Install the mower deck. See the instructions to “Remove and Install the Mower Deck”.
9.Before you mow, check the blade rotation control.
30
