Assembly | en |
|
Mount the Grass Bag
1.Mount the grass bag assembly onto the rear bag- ger brackets as shown (see Figure 5).
a.Use one hand to grab onto the handle at the rear of the bag frame assembly.
b.Use the other hand to hold the top bagger han- dle and guide the bag frame assembly onto the rear bagger brackets.
1 |
2 |
Figure 5
2.When mounting the bagger frame assembly, hold the bottom of the grass bagger assembly slightly away from the rear plate.
3.Rotate the grass bagger assembly until it locks in place.
Maintenance Free Battery
IMPORTANT: Before you attach the battery cables to the battery, check the battery date. The battery date tells if the battery must be charged.
1.Raise the seat support (see Figure 2).
2.Remove two screws (1) and battery cover (2) (see Figure 6).
3.Check the side of the battery (3) for the location of the battery date.
a.If the battery is put into service before this date, the battery cables can be attached without charging the battery. See “Install the Battery Cables.”
b.If the battery is put into service after this date, the battery must be charged. See “Charge the Battery.”
| 1 |
| 2 |
| 4 |
3 |
|
7 | 8 |
| |
| 5 |
| 6 |
Figure 6
11
