![](/images/new-backgrounds/1202314/202314497x1.webp)
Command Line Interface 5-81
5.14 Quality of Service Commands
mls qos
Use the mls qos command to enable or disable the QoS implemented in the system.
mls qos no mls qos
SYNTAX DESCRIPTION: | The mls qos command has no argument. |
DEFAULT VALUE: | The feature is disabled by default. |
COMMAND MODES: | Global configuration |
REFERENCE: | Cisco |
MENU: | Advanced Switch Configuration |
EXAMPLE: |
|
!Disable Quality of Service Switch(config)# no mls qos Switch(config)#
!Enable Quality of Service Switch(config)# mls qos Switch(config)#
priority-queue cos-map
Use the
priority-queue cos-map <traffic class> <priority>
SYNTAX DESCRIPTION: | <priority> | Integer ranges from 0 to 7. |
| <traffic class> | 0 to 3, 0 is lowest, 3 is highest |
DEFAULT VALUE: |
|
|
COMMAND MODES: | Global configuration | |
REFERENCE: | Cisco |
|
MENU: | Advanced Switch Configuration | |
| Set Priority Queue |
|