Symbol Technologies ES3000 manual Dot1x re-authenticate, Dot1x init

Command Line Interface 5-99

dot1x re-authenticate

Use this command to re-authenticate on an 802.1X-authorized port.

dot1x re-authenticate

SYNTAX DESCRIPTION: The dot1x re-authenticate command has no arguments or keywords.

DEFAULT VALUE:

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!re-authenticate on port 3 now Switch(config)# interface fastethernet0/3 Switch(config-if)# dot1x re-authenticateSwitch(config-if)#

dot1x init

Use the dot1x init command to display (initiate) status on an 802.1X-authorized port.

dot1x init

SYNTAX DESCRIPTION: The dot1x init command has no arguments or keywords.

DEFAULT VALUE:

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

! init on port 3

Switch(config)# interface fastethernet0/3 Switch(config-if)# dot1x init Switch(config-if)#