5-96ES3000 User Guide

dot1x timeout re-authperiod

Use this command to set the number of seconds between re-authentication attempts. The command affects the behavior of the switch only if periodic re-authentication is enabled.

dot1x timeout re-authperiod <minute>

SYNTAX DESCRIPTION: <minute>

Set the number of minutes

DEFAULT VALUE:

 

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!Set re-authentication time 2 min on port 7 Switch(config)# interface fastethernet0/7 Switch(config-if)# dot1x timeout re-authperiod30 Switch(config-if)#

dot1x timeout supp-timeout

Use this command to set the number of seconds for the timeout value.

dot1x timeout supp-timeout <second>

SYNTAX DESCRIPTION: <second>

Set the number of seconds

DEFAULT VALUE:

 

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!Set supp-timeout 60 sec on port 7 Switch(config)# interface fastethernet0/7 Switch(config-if)# dot1x timeout supp-timeout60 Switch(config-if)#

Page 264
Image 264
Symbol Technologies ES3000 manual Dot1x timeout supp-timeout, Dot1x timeout re-authperiod minute