![](/images/new-backgrounds/1202314/202314529x1.webp)
Command Line Interface 5-97
dot1x timeout quiet-period
Use this command to set the number of seconds the switch remains in quiet state following a failed authentication exchange with the client.
dot1x timeout quiet-period <second>
SYNTAX DESCRIPTION: <second> | Set the number of seconds |
DEFAULT VALUE: |
|
COMMAND MODES: Interface configuration
REFERENCE:Cisco
MENU:
EXAMPLE:
!Set quiet period time 60 sec on port 7 Switch(config)# interface fastethernet0/7
dot1x timeout server
Use this command to set the number of seconds the switch waits for a response to a RADIUS frame.
dot1x timeout server <second> |
|
SYNTAX DESCRIPTION: <second> | Set the number of seconds |
DEFAULT VALUE: |
|
COMMAND MODES: Interface configuration
REFERENCE:Cisco
MENU:
EXAMPLE:
!Set transmit time 10 sec on port 3 Switch(config)# interface fastethernet0/3