Symbol Technologies ES3000 manual Dot1x control-direction direction, On the incoming traffic

5-100ES3000 User Guide

dot1x control-direction

Use the dot1x control-direction command to impose dot1x authentication on either incoming or outgoing traffic.

dot1x control-direction <direction>

SYNTAX DESCRIPTION: <direction>	both	The dot1x authentication is imposed only
		on the incoming traffic
	in	The dot1x authentication is imposed on
		incoming and outgoing traffic

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!Set Control direction Both on port 5 Switch(config)# interface fastethernet0/5 Switch(config-if)# dot1x control-directionboth Switch(config-if)#