![](/images/new-backgrounds/1202314/202314557x1.webp)
Command Line Interface 5-111
EXAMPLE:
!Enable capacitor detection
Switch(config)# peth
Switch(config)#
peth limit
Use the peth limit command to set the power limit on a port.
peth limit <mwatt>
SYNTAX DESCRIPTION: | <mwatt> | Power limit |
DEFAULT VALUE: | 15 watt |
|
COMMAND MODES: | Interface configuration | |
REFERENCE: |
|
|
MENU: |
|
|
EXAMPLE:
!Set power limit 10 watt on port 2 Switch(config)# interface fastethernet0/2
peth priority
Use the peth priority command for when the power budget is not enough.
peth priority <level>
SYNTAX DESCRIPTION: | <level> | Critical - Set critical priority to critical |
|
| High - Set critical priority to high |
|
| Low - Set critical priority to low |
DEFAULT VALUE: | High |
|
COMMAND MODES: | Interface configuration | |
REFERENCE: |
|
|
MENU: |
|
|