Symbol Technologies ES3000 manual Sntp daylight-saving, Sntp timezone, Show timezone location

Command Line Interface 5-105

sntp daylight-saving

Use this command to enable or disable daylight saving, if time zone is applicable.

sntp daylight-saving

no sntp daylight-saving

SYNTAX DESCRIPTION:	This command has no argument.
DEFAULT VALUE:	This command is disabled by default
COMMAND MODES:	Global configuration
REFERENCE:	None
MENU:	Basic Switch Configuration Menu->SNTP Configuration->
	Set Daylight Saving
EXAMPLE:

!Enable daylight saving. Switch(config)# sntp daylight-savingSwitch(config)#

!Disable daylight saving. Switch(config)# no sntp daylight-savingSwitch(config)#

sntp timezone

Use the sntp timezone command to configure the timezone.

show timezone <location>

SYNTAX DESCRIPTION:	This location type ranges from 1 to 63.
DEFAULT VALUE:
COMMAND MODES:	Global configuration
REFERENCE:	None
MENU:	Basic Switch Configuration Menu->SNTP Configuration->
	Set time Zone