Symbol Technologies ES3000 manual Ip address dhcp, Ip address renew

5-28ES3000 User Guide

ip address dhcp

Use the ip address dhcp command to enable or disable the system to acquire its IP address through DHCP.

ip address dhcp
SYNTAX DESCRIPTION:	The ip address dhcp-bootp command has no argument.
DEFAULT VALUE:	The feature is disabled by default.
COMMAND MODES:	Layer-2 switch => Global configuration
	Layer-3 switch => Interface configuration (Vlan)
REFERENCE:	HP
MENU:	Basic Switch Configuration Menu->System IP->Enable/Disable DHCP
	Mode
EXAMPLE:

!Set IP address use dhcp Switch(config)# ip address dhcp Switch(config)#

ip address renew

Use the ip address renew command to renew a DHCP ip address.

ip address renew
SYNTAX DESCRIPTION:	The ip address renew command has no argument.
DEFAULT VALUE:	The ip address renew command has no default setting.
COMMAND MODES:	Layer-2 switch => Global configuration
	Layer-3 switch => Interface configuration (Vlan)
REFERENCE:
MENU:	Basic Switch Configuration Menu->System IP->IP Address Renew
EXAMPLE:

!Renew IP address Switch(config)# ip address renew Switch(config)#