Tektronix TLS 216 DIAg:SELect:ACQUISition (No Query Form), DIAg:SELect:ALL (No Query Form)

Command Descriptions
TLS 216 Programmer Manual 2–93
:DIAg : ?
LOG
RESUlt
<QString> in the following format:
<Status>,<Module name>[,<Status>,<Module name>...]
DIAG:RESULT:LOG?
might return :DIAG:RESULT:LOG "pass--Processor,pass--Display,
pass--FP/Proc Interface,FAIL--Front Panel".
DIAg:SELect:ACQUISition (No Query Form)
Selects the acquisition system test sequence to run when the DIAg:STATE
EXECUte command is sent. This command is equivalent to setting Area in the
Utility menu when System is set to Diag/Err.
Calibration and Diagnostic
DIAg:SELect:ACQUISition ALL
:SELect DIAg : ACQUISition <Space> ALL
ALL selects functional, memory, and register tests.
DIAG:SELECT:ACQUISITION ALL
selects all functional, memory, and register tests.
DIAg:SELect:ALL (No Query Form)
Specifies that all system test sequences will run when the DIAg:STATE
EXECUte command is sent. This command is equivalent to setting Area in the
Utility menu when System is set to Diag/Err.
Calibration and Diagnostic
DIAg:SELect:ALL ALL
Returns
Examples
Group
Syntax
Arguments
Examples
Group
Syntax